Objectives
Perform consistency check on a disk volume via command line interface using StorCLI
Prerequisites
- 1 or more Raid Disk Group(s) recognizable by LVM
- StorCLI installed
Steps
Step 1: Show Consistency Check Progress
You can show the progress of the consistency check using the following command.
/opt/MegaRAID/storcli/storcli64 /c0 /vX show cc
X represents the virtual disk number. You can also replace it with “all” to operate on all virtual disks registered.
Step 2: Start Consistency Check Operation
You can start the consistency check operation using the following command.
/opt/MegaRAID/storcli/storcli64 /c0 /vX start cc [force]
Step 3: Pause Consistency Check Operation
You can pause a currently running consistency check operation using the following command.
/opt/MegaRAID/storcli/storcli64 /c0 /vX pause cc
Step 4: Resume Consistency Check Operation
You can resume a currently paused consistency check operation using the following command.
/opt/MegaRAID/storcli/storcli64 /c0 /vX resume cc
Step 5: Stop Consistency Check Operation
You can stop a currently running consistency check operation using the following command.
/opt/MegaRAID/storcli/storcli64 /c0 /vX stop cc